ANSA Doors "E96" All Aluminium Rolling Grille

Maximum Size - 4000 mm wide x 3500 mm high

Applications

Ansa Doors all aluminium rolling grilles offer security, high level visibility and ventilation. All Aluminium Rolling Grilles are an attractive alternative for your security needs and are also quiet and smooth in operation. They are typically used for shop fronts, shopping malls, serving counters, bars, display units and product displays.

Features

1. Curtain - Assembled from aluminium vertical links and horizontal aluminium tubes running full width of the grille. For more information, refer to technical information detail below.
2. Bottom Rail - Fully enclosed extruded aluminium section. A bottom seal can be provided as an optional extra. For more information, refer to technical information detail below.
3. Side Guides (Track) - Extruded aluminium section with optional built-in PVC buffer. Side guides are available in different sizes and configurations to suit the application and aesthetics requirement. Where required or specified the Side Guides are bolted to fixing angles or posts of size and thickness to suit the shutter and application. For more information, refer to technical information detail below.
4. Roller Drum - Fabricated from mild steel or galvanised tube, with the outside diameter and thickness appropriate to the size and application of the aluminium roller shutter.
5. Bracket Plates - Fabricated from 3 mm galvanised steel in sizes to suit the height of the opening and engineered tube size.
6. Operation - Generally hand operated. However, appropriate tube motors can be fitted. Tube motors are 240 V and can be activated through a variety of control devices to suit application or your preference. Tube motors require single phase, 10 amp 3 pin plug socket within 1 metre of each door opening.
7. Door Locking - Two-way 2-point key operated lock fitted to bottom rail. Locking is not recommended for electrically operated aluminium roller shutters.
8. Finishes - Aluminium components are supplied in etch and clear anodising as standard. Powder coating (in standard available colours) is an optional extra and is applied using our in house powder coat line at Ansa Doors. All mild steel items are provided with zinc rich primer paint hand applied.
9. Hoods / Fascias - Available as optional extras to suit the application. Hoods are manufactured in house at Ansa Doors from 0.5 mm galvanised steel sheet. Fascias are fabricated using aluminium channel for the perimeter frame and interlocking aluminium extruded slats as an infill panel.
10. Weight - 3.575 kg/m²

Technical Information

E96 - ALL ALUMINIUM GRILLE BOTTOM RAIL DETAIL.pdf
E96 - ALL ALUMINIUM GRILLE SIDE GUIDE DETAIL.pdf
E96 - ALL ALUMINIUM GRILLE CURTAIN DETAIL.pdf
E96 - ALL ALUMINIUM GRILLE HEADROOM & SIDEROOM DETAIL.pdf