ANSA Doors "H14" 100mm Steel Roller Shutter

Maximum Size - 8000 mm wide x 7000 mm high

Applications

The H14 steel roller shutter is an extremely robust access door, for building perimeter security or storage applications. It is typically used in warehouses, factories, distribution and transport facilities, stadiums, garages, plant rooms, remote buildings, hospitals, council facilities, sports grounds and for security applications.

Features

1. Curtain - Constructed using 100 x 0.8 mm or 100 x 1.0mm interlocking slats in galvanised steel roll formed in house at Ansa Doors. Slat thickness is dependent on the opening width and any security requirements. The slats are retained in position using nylon end clips, fitted with nylon rivets. For more information, refer to technical information detail below.
2. Bottom Rail - Rigid extruded aluminium section, with PVC seal. An optional steel angle bottom rail can also be provided. For more information, refer to technical information detail below.
3. Side Guides (Track) - Side Guides are fabricated from galvanised steel channel roll formed in house at Ansa Doors, and completed with splayed tops. Side guides size is 75 x 35 x 2.0mm or 100 x 35 x 2.0mm. Guide type is dependent on opening width. Where required or specified, the side guides are securely fixed to fixing angles or posts of size and thickness to suit the shutter and application. For more information, refer to technical information detail below.
4. Roller Drum - Fabricated from mild steel or galvanised tube with the outside diameter and thickness appropriate to the size and application of the steel roller shutter.
5. Bracket Plates - Fabricated from 10mm mild steel in sizes to suit the height and width of the opening and engineered tube size.
6. Operation - Either chain operated or electrically operated. Steel shutters requiring electrical operation can be activated through a variety of control devices, to suit application or your preference.
7. Door Locking - Shootbolts fitted internally to accept padlocks for chain operated roller shutters only. Locking is not recommended for electrically operated steel roller shutters.
8. Finishes - Galvanised steel items are left in raw form. Powder Coating (in standard available colours) is an optional extra, and is applied using our in house powder coat line.
9. Vision / Ventilation - As an optional extra, slats can be provided with perforations or slots to provide ventilation or vision through the curtain. For more information, refer to technical information detail below.
10. Hoods / Fascias - Are available as optional extras, to suit the application. Hoods are manufactured in house at Ansa Doors, from 0.5 mm galvanised steel sheet. Fascias are fabricated using 75 x 35 x 2.0 mm galvanised steel channel for the perimeter frame and interlocking galvanised steel roll formed slats as an infill panel.
11. Weight-
    

    11.813 kg/m² (0.8mm thick slat)

    14.843 kg/m² (1.0mm thick slat)

Technical Information

H14 - BOTTOM RAIL PROFILE.pdf
H14 - GUIDE PROFILE.pdf
H14 - HEADROOM & SIDEROOM DETAIL.pdf
H14 - SLAT PROFILE.pdf
H13 - SLAT PROFILE.pdf
FIRE ESCAPE WICKET GATE DETAIL.pdf 
TRADITIONAL WICKET GATE DETAIL.pdf